AquaCer, AquaCer-I Submersible Level Transmitter AquaCer with ceramic measuring cell

Klay Instruments

Level measurement of drinking water, surface water, wastewater and sludge.

Often used by water boards and water works.

Measurement in water wells, resrvoirs, storage tanks and underground tanks.

AquaCer is a submersible hydrostatic level transmitter with cable for level measurement in deep wells, water & waste water,etc.
AquaCer is based on a small Capacitive Ceramic sensor/diaphragm and has a Fixed Range (Type FR) and an adjustable version (by HART® Protocol), type AquaCer-I (Accuracy 0,1%)
The instrument has an active temperature compensation and a perfect long term stability.
- ranges : 0,1 bar to 5 bar
- output signal : 4-20 mA / 2-wire (option: HART® Protocol)
- accuracy : 0,2% from adjusted span (AquaCer-I: 0,1%)
- power supply : 9 – 36 Vdc
- protection : IP68
- process temperature : -10'C to +70'C
- sensor material : Ceramic Al2O3
- sensor sealing : Viton o-ring (standard)
- other wetted parts : AISI 316L
- diameter transmitter : 22mm
- material cable : PUR Polyurethane (Option: PE or Hytrel)
- Variable pressure
- Output signal 4..20 mA analogue
- Digital communication HART®
- Accuracy 0.1%, 0.2%
- Process connection other
- Sensor / wetted parts material ceramic
- Seals Viton® / FKM / FPM
- Power supply 2 wire 24 VDC 4-20mA loop
- Housing stainless steel
- Ingress protection rating IP68
`

Pressure

Liquid level

Liquid & gas flow

Valves

Solids level

Solids flow

Moisture

Dust monitors

Temperature

Thermography

Gas detection

Control

AquaCer, AquaCer-I Submersible Level Transmitter AquaCer with ceramic measuring cell

Klay AquaCer Datasheet

Klay AquaCer Manual

Klay AquaCer with TTL Output Manual

Klay Short form catalogue

Similar products

HydroCer, HydroCer-I Submersible level transmitters with capacitive ceramic sensor

Hydrobar Submersible Level Transmitter Hydrobar

Contact data

MERCON Sp. z o.o.