The Hydrobar 'S' is a complete range of microprocessor based submersible level transmitters for top mounting, with a local display and adjustment by three push buttons.
Zero and span can be calibrated very easy without test pressure.
The display which can indicate a number of chosen engineering units is also used during programming.
Process temperatures can be indicated and damping times adjusted from 0 to 25 secs. A 4-20 mA current simulation can be performed, so as a tank linearisation.
The Intelligent Series 2000-Hydrobar are fully temperature compensated, and are equipped with strong flush diaphragms who are laser welded, this results in a perfect long term stability.
515kb | ENG
974kb | ENG
3.1MB | ENG
44kb | ENG
274kb | ENG
1.9MB | ENG
3.6MB | ENG
623kb | ENG
2.8MB | ENG
1.3MB | ENG
535kb | ENG
1.2MB | POL
Basic submersible hydrostatic level transmitter with sensor mounted on cable or extendeddetails
The Hydrocer is a level transmitter with cable or tube extension. Application for level measurement of water, wastewater and sludge.details