MERCON
  1. Products
    • Pressure

    • Liquid level

    • Liquid & gas flow

    • Valves

    • Solids level

    • Solids flow

    • Moisture

    • Dust monitors

    • Temperature

    • Thermography

    • Gas detection

    • Control

  2. Services
  3. Applications
  4. News
  5. About us
  6. Downloads
  7. Career
  8. Contact

Menu

  • EN
  • PL
  • DE
  1. Main page
  2. Products
  3. Liquid level
  4. Capacitive switches
  5. Level switch for liquids and pastes

back

KMW Level switch for liquids and pastes

Klay Instruments

Klay Instruments

Mikrofalowy sygnalizator poziomu KLAY KMW

Robust and compact
All stainless steel
FDA and EHEDG conformity
Suitable for CIP / SIP cleaning
Accurate adjustability

Approvals & certificates

  • CE CE
  • EHEDG EHEDG
  1. Features
  2. Specification
  3. Downloads
  •  

    Level switch KMW is microprocessor based and can be installed in any position in tanks or piping systems. 
    The measuring principle is an electromagnetic wave (100…180MHz). A high frequency signal sweep is radiated from the sensor tip into the tank or pipe. The medium acts as a virtual capacitor, which together with a coil in the sensor, will form a circuit creating the switching point. This virtual capacity will depend of the dielectric value of the medium and is well defined for most media. 
    Therefore the KMW is suitable for almost all liquids and paste-like medias. 
    There are 7 base settings for several medias. To adjust the sensitivity there are two possibilities, by internal dipswitch or via PC with software. The characteristics of the medias are visualizable and adjustable with the PC-USB interface software. 
    For viscous and adhesive medias the KMW is available with extended PEEK sensor. Applications are high and low level detection in tanks and dry run protection of pumps in the Food & Beverage and Pharmaceutical industry.  All common hygienic process connections are available.

    • Variable level
    • Output signal PNP / NPN
    • ATEX none
    • Process connection 1/2 BSPP male, 1 BSPP male, Tri-Clamp 1-1/2", other
    • Sensor / wetted parts material 316/316L
    • Seals PEEK
    • Power supply external 24 VDC
    • Electrical connection M20x1.5 female, 1/2 NPT female
    • Housing stainless steel
    • Ingress protection rating IP67
  • `
    1. Klay KMW Datasheet

      387kb | ENG

    2. Klay KMW Manual

      568kb | ENG

Similar products

  1. Level switch for liquids

    FLX Level switch for liquids

    Robust level switch.

    Measuring principle is conductivity.

    For level detection of conductive fluids.

    details

Contact data

MERCON Sp. z o.o.

Torunska 222
PL 87-805 Wloclawek

phone:
+48 725 176 543
fax:
+48 54 411 89 04
e-mail:
Details
  1. Products
  2. Services
  3. Applications
  4. News
  5. About us
  6. Downloads
  7. Career
  8. Contact

Privacy policy
© 2016-2019 MERCON

Find product

Design by Tonik

X Our website uses cookies. If you disagree for that, please change your browser's cookies settings.