Products
Services
Applications
News
About us
Downloads
Career
Contact

EN
PL
DE

Main page
Applications

Applications

Filter

Category

Cement

Chemical

Sugar

Power

Mining

Metallurgy

Pulp & paper

Oil & gas

Partners

Bachofen

Hawk

Honeywell

Klay Instruments

Magnetrol International

Mütec Instruments

Sintrol

S.K.I.

SOMAS Instrument

United Electric Controls

Coal dust dosing in dust firing systems

Coal dust firing systems requires the proper mixture of coal dust and air. It must be controlled in real time to keep most effective combustible conditions. The solution is microwave mass transmitter MF 3000.
details
Cement mass flow measurement

Weighing systems are not always the best solution for controlling and dosing. There are not so many solutions for measuring solid materials in contrast to wide variety of devices measuring liquids. Interesting mass flowmeter for bulk materials is MF 3000 microwave transmitter.
details
Alternative for displacer with torque tube

Displacers with torque tube are common level measurement devices in industrial applications. Their complicated mechanical design causes a lot of problems in use. Magnetrol's E3 Modulevel® displacer transmitters have no torque tube but LVDT (Linear Variable Differential Transformer) which makes these units easy to use and eliminates old generation transmitters' disadvantages.
details
Reliable level technology for coal fired power stations

There are several locations where coal fired power plants measure level of coal. Integral aspect of the coal level measurements, so as other solids and bulk materials, is dust. The best solution, immune to dust are accoustic level transmitters Sultan with temperature compensation and self-cleaning sensors.
details
Molten sulphur accurate level measurement

Not every level measurement application is straightforward. In some instances, the nature of the substance being measured creates a hostile measurement atmosphere requiring creative solutions. Without reliable instruments in these environments, the level measurement readings can be inaccurate and cause significant problems.
details
Level measuring through lime kiln's ceramic wall

Level measurement in a lime kiln is difficult due to the high temperature of 1000°C inside it. Because of that isotopic measurements are often used, but the use of radioactive sources is associated with law restrictions and hindered maintenance. The solution is Gladiator microwave level switch. Its signal penetrates easily the firebrick wall.
details
Bulk products level measurement in silos

Level measurement in dusty environment causes problems. Many of methods fail, readings are unreliable or specific technologies do not fit applications at all because of principle of operation. Interesting, immune to dust, moisture and fumes solution are accoustic wave level transmitters Sultan.
details
Series ONE safety transmitters in power plant water supply

Power plants require continuous, undisturbed water supply. Maintaining water availability at the required level is a critical factor in the power plant. Water is used for cooling and in the steam-turbine circuit. For the second purpose, demineralized water is used in large amount.
details
Steam drums' guided wave radar water level measurement

Advantages of guided wave radar technology use with respect to other level measurement technologies in steam drum applications.
details
Coal moisture measuremement on conveyour belt

For mining companies moist control in the extracted coal is important due to a number of additional costs in the case of content not meeting the expected customers levels. The solution is a real-time moisture meter HUMY 3000.
details
Acoustic wave transmitters in crushers' feed level measurement

Level measurement of ore, coal, stones or gravel is problematic for most devices. Dusty environment in addition of moist from sprinklers are a challenge for devices. For most transmitters such conditions are an insurmountable obstacle. For such applications Sultan level transmitters fit perfectly - the acoustic wave they emit passes through dust and water aerosol without any obstacles.
details
Predictive maintenance - chute blokage prevention

Microwave Switches are traditionally used as Blocked Chute switches. All the Microwave switches available in the market tells you that the chute is blocked. Some switches can give a false alarm and trip because of build up on the chute walls. This causes lot of downtime to the site costing them valuable time and money. Hawks' Microwave switch Gladiator Gen 3 thanks to strong signal can work while other similar switches fails. Its other advantage is secondary alarm switch that can be set for material build up alarming.
details

Contact data

MERCON Sp. z o.o.

Torunska 222
PL 87-805 Wloclawek

phone:: +48 725 176 543
fax:: +48 54 411 89 04
e-mail:

Products
Services
Applications
News
About us
Downloads
Career
Contact

Privacy policy
© 2016-2019 MERCON

Find product

Design by

X Our website uses cookies. If you disagree for that, please change your browser's cookies settings.