PARCOL has started the production of specialty control valves for urea plants in 1965. Approximately 200 production units are installed and run with end-users full satisfaction.
1-4800 angle, split body control valves are designed and manufactured so as to grant good service and longer trouble free life with very reduced maintenance.
The original and simple design of PARCOL valves as well as the right selection of the part materials result in great success of the same.
Materials are adequate for urea and carbamate fluids and comply with the material specifications for this service of main Licensors such as Snamprogetti, Stamicarbon, Urea Casale and others.
Connections are obtained directly on the single piece that constitutes the valve body in order to keep down the weight, whereas the shape of internals does not leave dead zones. In fact dead zones are a cause for corrosion since carbamate strengthens its corrosive action particularly in these zones due to the failure of oxygen protection (passivation).
1.2MB | POL
446kb | ENG
641kb | ENG
1.3MB | ENG
6.6MB | POL
191kb | ENG
361kb | ENG
88kb | ENG
3.8MB | ENG
2.2MB | ENG
3.7MB | ENG
1.1MB | ENG
1.5MB | ENG
Traditional plug or balanced plug with guiding cage control valves for chemical industry applicationsdetails
The most universal and compact solution for pressure reduction and desuperheating of turbine by-pass linesdetails
High rangeability, multiple nozzle desuperheaters with independent 7 to 21 spray nozzlesdetails