MERCON
  1. Products
    • Pressure

    • Liquid level

    • Liquid & gas flow

    • Valves

    • Solids level

    • Solids flow

    • Moisture

    • Dust monitors

    • Temperature

    • Thermography

    • Gas detection

    • Control

  2. Services
  3. Applications
  4. News
  5. About us
  6. Downloads
  7. Career
  8. Contact

Menu

  • EN
  • PL
  • DE
  1. Main page
  2. Products
  3. Dust monitors
  4. Process monitors
  5. Dust monitors

back

S304 Dust monitors

Sintrol

Sintrol

Pyłomierz procesowy S304 Sintrol

Combining the S303's features with the added feature of allowing calibration to give readings in mg/m3 format, it can give plant operators the ability to see absolute value measurements of dust concentrations.
Installed in emissions stacks or in common ducts of a stack, the S304 can give a continuous dust concentration in the process enabling constant monitoring of the dust levels.

Approvals & certificates

  • CE CE
  • ATEX Ex i ATEX Ex i
  1. Features
  2. Specification
  3. Downloads
  • S304 dust moniotor is intended to be used in applications requiring absolute value measurements of dust concentrations - it can be calibrated to give the user a mg/m3 output.

    Once calibrated, this dust monitor helps plant operators know exactly how much dust is passing through the stack or outlet duct of their plant.

    Monitors are based on Sintrol’s proven Inductive Electrification Technology and has a detection limit of 0,01 mg/m3. Available features allow the S300 series to be used for a wide variety of applications such as stack, process and filter house monitoring.


    Features

    • sensitivity from 0.01 mg/m3
    • automatic calibration
    • automatic zero and drift compensation
    • particles size from 0.3 µm
    • two independent alarm outputs
    • 4..20 mA analogue output
    • easy setup with free DustTool software
    • local indication - LED and block display
    • maximum temperature: 300°C (optionally 700°C)
    • maximum pressure: 6 bar
    • process connection: clamp or flanged
    • RF models available
    • Variable dust
    • Output signal 4..20 mA analogue, VDC switch
    • Digital communication Modbus®, USB, RS-485
    • ATEX Ex i
    • Process connection other
    • Sensor / wetted parts material 316/316L, PTFE, ceramic, PEEK
    • Seals Viton® / FKM / FPM
    • Power supply external 24 VDC, external 230 VAC
    • Housing epoxy coated aluminum
    • Ingress protection rating IP65
  • `
    1. Sintrol S303 S304 Datasheet

      258kb | ENG

    2. MERCON Bulk solids Catalogue

      1.3MB | POL

    3. Sintrol application questionnaire S-Series and EXO EN

      444kb | ENG

Similar products

  1. Dust monitors

    E-Spy Dust monitors

    Device for direct ESP effectivness control and optimization

    details
  2. Dust monitors

    S303 Dust monitors

    Dust trend monitors with 4..20 mA output

    details
  3. WirelessHART® Gas Detectors

    Vanguard WirelessHART® Gas Detectors

    The Vanguard WirelessHART® gas detector is ideal for the monitoring of toxic and combustible gases

    details
  4. Ambient dust monitors

    DumoPro Ambient dust monitors

    Dust monitors for alarming and continuous trend monitoring in ambient air environments

    details

Contact data

MERCON Sp. z o.o.

Torunska 222
PL 87-805 Wloclawek

e-mail:
Details
  1. Products
  2. Services
  3. Applications
  4. News
  5. About us
  6. Downloads
  7. Career
  8. Contact

Privacy policy
© 2016-2019 MERCON

Find product

Design by Tonik